6 Impeccable Tips on How to Waterproof Leather Boots

Whether you bought the leather boots you are wearing from a store across the street, shopped for them online, or they are a present from a loved one, the fact is you would like the boots to stay a while longer. Sometimes, the durability of the footwear we have depends on the care we put in place. It is for this reason you need to learn about some of the easy yet practical tips to waterproof your leather boots.

It appears that out of the 6 impeccable tips below, the use of Tarrago High Tech Nano Waterproof Leather Spray stands tall among its peers. First, it is easy to use. Unlike other methods of waterproofing leather boots, you don’t need to spend much of your time to make it happen.

The other thing you need to know about Tarrago High Tech Nano Spray is that it is easily available. In fact, you will find this with a click of a button. Besides, Tarrago High Tech Spray is the readily available option that leaves your leather boots rehydrated yet waterproofed throughout your wearing.

Having tipped you on this best way to waterproof your leather boots, it is now time to look at the whole package, the six easy methods you can apply to ensure your leather boots remain as water-repellent as possible until you decide to throw them away.

1. Apply Creams

Apply Creams

If you have used leather for a long time, chances are you have used a shoe cream to ensure your boots stay not only waterproofed but also conditioned for a long time. Shoe creams have been around for a much longer time than most of the leather waterproofing methods.

In fact, this method works better for hiking boots, especially if the surrounding is not so dusty. Most creams for waterproofing boots in the market are derived from lanolin, sheep wool oil that retains its waterproofing strength for a long time.

For effective use, apply the cream when it is still cold and try not to expose the boot to direct sun or high temperatures. To apply, you need to use a piece of cloth to apply a liberal amount of the cream on the boot, and you are good to go. The only caution is not to use it on manmade leather.

The product works better on natural leather.

2. Use Tarrago High Tech Nano Waterproof Leather Spray

Leather Spray

We talked about the introduction of this product. To date, the performance of Tarrago High Tech Spray is impeccable. You can use the spray on the ideal boots for working on concrete floors, roofing boots, or any other work boots for that matter.

Commercial sprays are very effective to the point that almost everybody with leather boots knows the best brand in the market. Even large corporate retailers are doing all they can to produce these sprays in large quantities.

After cleaning your leather boots, you can decide to either allow them to dry before you spray or apply the spray before you let them dry under a shade.

You can hold the boot’s shape by inserting some materials inside it, such as using newspapers or old clothes.

When spraying, ensure the nozzle is 8-12” from the boots. Make sure you don’t spray your face. For the best results, you can do the second coat after a few minutes. Upon application of Tarrago Nano Protection spray, the NANO elements, present in the spray cover the leather fibers, making them more dirt and water-repellent.

PS: The spray has a color that, if it falls on the floor or any other surfaces, it may be hard to clean. To avoid this, spread the newspapers or the old clothes, put the boots on top of the spread surface before you start to spray.

3. Oils

Oils

To lengthen their days, increase moisture concentration in the leather, and to guard against the percolation of water, most leather products benefit from oils. Leather boots, especially those that are used to stand the whole day, are not left out.

Some of the natural oils that work best for waterproofing leather boots include neatsfoot, mink, and mineral. These products ensure the leather boot increases its life span thanks to its waterproofing and moisture increasing abilities.

Although you need to apply a liberal amount of the oils on the boot, you need to exercise some caution. For instance, if you apply a lot of the oil repeatedly, after some time, fibers in your leather boot may start to discolor. The worst that will happen is when the fibers separate!

PS: Leather boot care experts agree that for good results, you only have to reapply a moderate amount of waterproofing oils 4 or so weeks after the initial application.

4. Use Pastes

Pastes for leather waterproofing are also a sure way to ensure no water enters your leather boots. The market has a variety of pastes for waterproofing. Before you settle on a particular brand, you need to do thorough research to ascertain which paste does a better job on your type of leather.

Although oftentimes, the instructions on how to apply such pastes on leather boots are universal, individual companies issue their directions. Mostly, they do this in detail at the cover of the package or better still, and they can include a leaflet that will give you all the information you need for the paste application process.

Like its counterpart, cream, you also need to ensure the boots are clean. However, for pastes, the boots need to be completely clean before you start to apply. Besides, make sure the boots are dry completely before you subject them to any moisture that is deemed external.

By doing so, you guard your Red Wing boots are guarded against intense heat that might usurp the pastes fast, leaving the boots hard.

Unlike the creams and the oils above, you can apply small amounts of pastes, as many times as you wish, as long as you do so when you are sure the first application has done its work and that there is a need for a new application.

5. Use Acrylic Co-Polymer Spray

Co-Polymer Spray

It is good to mention that this new product in town that is garnering many reviews for good reasons. Acrylic Co-Polymer Spray is by far one of the highly-sort after leather waterproofing products today.

For the product to raid the hearts of many farm and ranch boots users, it forms a thick layer on the surface of the boots upon application. The result is that the leather is able to breathe without challenges while it maintains tender nature.

There is no difference in the application process from the Silicone Polymer Spray. What may seem to be the only difference is that many people are now finding Acrylic Co-Polymer Spray to work even on leather sofas, leather handbags, and leather car seats.

Besides, the product also acts as a stain protector. It is for this reason that many of those who have used it on other leather products are finding it ideal for waterproofing and guarding their tactical boots against stains.

Before applying this waterproofing agent, ensure your leather boots are clean and do not have any debris, lest they will be embedded under the spray. Wearing protective gloves and glasses, if any, lay down newspapers or a piece of cloth before you spray.

You can apply Acrylic Co-Polymer Spray as many times as you want but do so regularly when you are sure you are going to encounter wet conditions. When spraying the product, make sure the coat is even from the toebox to the shaft of the boots.

6. Make Use of Wax

Make Use of Wax

To some people, the wax may be a classic way of waterproofing, for those who align themselves to ‘Old is Gold,’ then using wax as a waterproofing method for your leather boots is by far the best way.

There are different types of waxes, but natural beeswax is the most prevalent. The good thing about natural beeswax is that when stored properly, in a dry but cool place, it can stay for many years.

Unlike the rest of the methods that require you to use a few bucks every few days to purchase them, you can take several months or years before you go back to buy another block.

What we learn from the above products is, every time you want to waterproof your boots for retail work, you must clean the boots and ensure they are dry before applying. However, with natural beeswax, the application process is slightly different.

Whether you are wearing boots for working in the kitchen, a place known to be wet all the time, you must first warm the boots as well as the natural beeswax before you apply it. You can use your bare fingers to apply the natural beeswax.

To reach deeper parts of the boot and cracked parts, you may be forced to use additional tools. Whichever the way, make sure every part of the boots touches the warm beeswax.

The interesting part of this process is that you will need to reheat the boots again after the beeswax application to ensure all parts have an even application of the wax. You should then allow the boots to dry naturally in a cool but dry place for some two days before you wear them.

PS: For this method to work best for you, it is advisable that you avoid walking in the sun or in hot places because high temperatures tend to melt off the wax.

Wrap Up

There is no need to keep buying boots each year because they allow water to reach your feet. This may cause cold or water-related diseases. The best way to handle this is to invest in high-quality waterproof products for leather boots.

The good thing about it is you can now make your leather boots waterproof fast, easily, and at pocket-friendly prices. You can purchase all the products mentioned in this article in one place and use them for several months. 

You will only have to decide which products work best for your leather boots.

Robert Hallman
 

Robert is a sports enthusiast, writer, blogger & chief editor at Sportsly.NET. He hailed from Big Lake, Texas. He also loves to play all types of exotic games, test different kinds of sports gear.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: